Board; Wf-1008 Board; Gp-1019 Board - Sony PXW-Z190V Service Manual

1-3-29. BI-342 Board
The BI-342 board contains a 1/3-type CMOS image sensor.
The BI-342 board is used for Rch and Bch.
1-3-30. BI-350 Board
The BI-350 board contains a 1/3-type CMOS image sensor.
The BI-350 board is used for Gch
1-3-31. VC-41 Board
The VC-41 board contains IC0600, IC6000, IC1600, and IC0100.
Signals from the imager are input to IC0100.
Image signals are distributed in IC0100 to IC0600 and IC6000.
IC0600 performs main-line signal processing.
IC6000 detects the image signal to control the lens.
IC1600 encodes and decodes main-line signals from IC0600.
The data encoded in IC1600 is sent to IC6000 through IC0700 on the AR-5 board, and is then recorded in the SD media from
IC6000.
With respect to external output signals, monitor signals are sent from IC0600 to IC2300 and then to the SDI/HDMI/VIDEO OUT
driver. Then the monitor signals are output from the connector.
IC6000 performs proxy recording and network control.

1-3-32. WF-1008 Board

The WF-1008 board contains a Wi-Fi antenna.

1-3-33. GP-1019 Board

The GP-1019 board contains a GPS module.
This GPS module is controlled by the UART signals from IC6000 on the VC-41 board.
9