Sony PXW-Z190V Service Manual page 59

9. Disconnect the flexible board from the connector (CN1000) on the IF-1346 board.
10. Disconnect the flexible flat cable from the connector (CN2000) on the IF-1346 board, and then remove the microphone unit.
11. Remove the two precision screws, and then remove the panel electrostatic plate.
12. Remove the three precision screws, and then remove the IF-1346 board.
Precision screws
(TP2 x 5)
Control panel
13. Install the removed parts by reversing the steps of removal.
Precision screws
(TP2 x 5)
IF-1346 board
CN1000
CN2000
Flexible flat cable
Microphone unit
Panel electrostatic plate
Flexible board
56