Board - Sony PXW-Z190V Service Manual

2-10. AR-5 Board
Preparation
Remove the outside panel assembly. (Refer to "2-2. Outside Panel Assembly".)
1.
2. Remove the CT-287A board. (Refer to "2-3. CT-287A Board".)
3. Remove the jack assembly. (Refer to "2-4. VC-41 board".)
4. Remove the inside panel assembly. (Refer to "2-7-1. Inside Panel Assembly".)
5. Remove the handle assembly. (Refer to "2-8-1. Handle Assembly".)
Procedure
1. Remove the four precision screws, and then remove the duct cover (upper).
2. Remove the duct cover guide.
3 Disconnect the fine-wire coaxial cable from the connector (CN4103) on the VC-41 board.
4. Disconnect the flexible board from the connector (CN4300) on the VC-41 board.
Fine-wire coaxial cable
Flexible board
Precision screws
(P2 x 4)
CN4103
VC-41 board
CN4300
Duct cover (upper)
Duct cover guide
Arrangement of fine-wire coaxial cables and
flexible board
Channel
Fine-wire coaxial cable
Bosses
Flexible board
61