Disconnecting/Connecting Fine-Wire Coaxial Cable - Sony MCC-3000MT Service Manual

Connecting
1. Slide or lift up the portion A in the direction of the arrow and securely insert the flexible card wire into the deep
end of the connector.
2. Return the portion A to its original position and lock the connector.
1-11-7.

Disconnecting/Connecting Fine-Wire Coaxial Cable

Notes
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is free from dirt or dust.
Type A
Disconnecting
OK Hold the connector to remove.
NG
1. Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
MCC-3000MT
Do not attempt to remove by
pulling the cables.
1-21