Omron SYSMAC C200HS Installation Manual page 161

Specifications
Terminal Connections
Note 1. The polarity of the input power supply can be either positive or negative. The polarity of all commons,
however, must be the same.
2. COM terminals must all be wired even though they are connected internally.
DC Input Unit C200H-ID219
m words
24 VDC
24 VDC
Rated Input Voltage
Input Impedance
Input Current
ON Voltage/ON Current
OFF Voltage/OFF Current
ON Response Time
OFF Response Time
No. of Circuits
Internal Current Consumption
Weight
m + 1 words
(m = 030 + 2 × I/O number)
24 VDC
24 VDC
+10%
24 VDC /
–15%
3.9 kΩ
6 mA (at 24 VDC)
15.4 VDC min./3.5 mA min.
5.0 VDC max./1 mA max.
1.0 ms max.
1.0 ms max.
64 (32 points/common)
Note The number of points that can be ON simulta-
neously is limited according to the ambient
temperature. Refer to the following diagram
for details.
120 mA 5 VDC max.
250 g max.
Appendix B
147