Signal Connection/Motor Protection - Siemens SIMOTICS T-1FW3 Configuration Manual

Electrical connection
8.3 System integration
Table 8- 4 Cable cross-sections (Cu) and outer diameter of the connecting cables in the standard version
Shaft Option Rated current (I
height
5)
w/o
150
w/o 50 A < I
w/o 105 A < I
M02 I
1)
w/o
200
w/o 50 A < I
w/o 105 A < I
4)
M02 I
1)
N
P01 260 A < I
2)
w/o 260 A < I
280 P01 I
2)
N
w/o I
N
P04 450 A < I
3)
w/o 450 A < I
Option M02: Terminal box GK 603 with removable front plate
1)
Option P01: Cable entry plate 3 x M63 x 1.5 for terminal box 1XB7-700
2)
Option P04: Cable entry plate 4 x M63 x 1.5 for terminal box 1XB7-712
3)
1FW3206-3❑P supplied as standard with 1XB7-700. Terminal box GK 630 is possible on request.
4)
You must order the options separately.
5)
Note
MOTION-CONNECT 500 power cables are available up to a cross-section of 120 mm² and
MOTION-CONNECT 800PLUS up to 50 mm
The listed cables are UL and/or CSA approved.
The approvals can be taken from the current catalog in Chapter "MOTION-CONNECT
connection system".
8.3.3

Signal connection/motor protection

DRIVE-CLiQ is the preferred method for connecting the encoder systems to SINAMICS.
Motors with a DRIVE-CLiQ interface can be ordered for this purpose. Motors with a DRIVE-
CLiQ interface can be directly connected to the associated motor module via the available
MOTION-CONNECT DRIVE-CLiQ cables. The MOTION-CONNECT DRIVE-CLiQ cable is
connected to the motor in degree of protection IP67. The DRIVE-CLiQ interface supplies
power to the motor encoder via the integrated 24 V DC supply and transfers the motor
encoder and temperature signals and the electronic type plate data, e.g. a unique
identification number, rating data (voltage, current, torque) to the control unit. The MOTION-
CONNECT DRIVE-CLiQ cable is used universally for connecting the various encoder types.
These motors simplify commissioning and diagnostics, as the motor and encoder type are
identified automatically.
306
) Terminal
N
box type
I ≤ 50 A GK 230
N
< 105 A GK 420
N
< 260 A GK 630
N
≤ 260 A GK 603
N
I ≤ 50 A GK 230
N
< 105 A GK 420
N
≤ 260 A GK 630
N
≤ 260 A GK 603
≤ 450 A 1XB7-700
N
≤ 450 A 1XB7-700
N
≤ 450 A 1XB7-700
≤ 450 A 1XB7-700
≤ 710 A 1XB7-712
N
≤ 830 A 1XB7-712
N
Terminal Thread for
cable entry
bolt diam.
(mm)
5 2 x M32 x 1.5
10 2 x M40 x 1.5
10 2 x M50 x 1.5
5 / 10 2 x M63 x 1.5
5 2 x M32 x 1.5
10 2 x M40 x 1.5
10 2 x M50 x 1.5
5 / 10 2 x M63 x 1.5
12 3 x M63 x 1.5
12 3 x M75 x 1.5
12 3 x M63 x 1.5
12 3 x M75 x 1.5
16 4 x M63 x 1.5
16 4 x M75 x 1.5
.
2
Configuration Manual, 08/2020, A5E46027705B AA
Cable entry Max. con-
max. diam. / ductor cross-
width A/F section
1)
(mm) (mm )
2
46 / 40 2 x 16
60 / 55 2 x 35
68 / 60 2 x 50
81 / 75 2 x 50
46 / 40 2 x 16
60 / 55 2 x 35
68 / 60 2 x 50
81 / 75 2 x 50
92 / 81 3 x 95
92 / 81 3 x 120
92 / 81 3 x 95
92 / 81 3 x 120
92 / 81 4 x 95
105 / 95 4 x 120
1FW3 complete torque motors
Conductor
diam.
(mm)
11 - 24
19 - 31
27 - 38
11 - 38
11 - 24
19 - 31
27 – 38
11 – 38
39 – 52
41 – 56
39 – 52
41 - 56
39 - 52
41 - 56