Siemens SIMOTICS T-1FW3 Configuration Manual page 6

Introduction
Operating instructions without a specified sequence are identified using a bullet point:
● Execute the operating instructions.
Enumerations
● Enumerations are identified by a bullet point without any additional symbols.
– Enumerations at the second level are hyphenated.
Notes
Notes are shown as follows:
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
More information
Information on the following topics is available at:
● Additional links to download documents
● Using documentation online (find and search in manuals / information)
More information (https://support.industry.siemens.com/cs/ww/en/view/108998034)
If you have any questions regarding the technical documentation (e.g. suggestions,
corrections), send an e-mail to the following address: Email
(mailto:docu.motioncontrol@siemens.com)
Internet address for products
Products (http://www.siemens.com/motioncontrol)
My support
Information on how to produce individual contents for your own machine documentation
based on Siemens contents is available under the link:
My support (https://support.industry.siemens.com/My/ww/en/documentation)
Note
If you want to use this function, you must register once.
Later, you can log on with your login data.
4
1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA