Siemens SIMOTICS T-1FW3 Configuration Manual page 316

Installation drawings/Dimension drawings
9.1 CAD-Creator/DT-Configurator
● 2SP1 motor spindles
● 1FN3 linear motors
SINAMICS S120
● Control Units
● Power Modules (blocksize, chassis)
● Line Modules (booksize, chassis)
● Line-side components
● Motor Modules (booksize, chassis)
● DC link components
● Additional system components
● Load-side power components
● Encoder system connection
● MOTION-CONNECT connection system
SIMOTION
● SIMOTION D
● SIMOTION C
SINUMERIK solution line
● Control systems
● Operator components for CNC controls
DT CONFIGURATOR
In the DT CONFIGURATOR - you can simply and quickly find
● dimension drawings
● 2D/3D CAD data
The DT CONFIGURATOR supports you when generating plant/system documentation
regarding project-specific information.
Note
The 3D model in the DT CONFIGURATOR is a simplified representation that does not show
all of the details.
You can find further information on the Internet at DT-Configurator
configurator):
314
(http://siemens.com/dt-
1FW3 complete torque motors
Configuration Manual, 08/2020, A5E46027705B AA