Transport Operations; Shipping Transport; Transporting The Machine - Case CX145C SR Operator's Manual

5 - TRANSPORT

SHIPPING TRANSPORT

Transporting the machine

ATTENTION: For transporting the machine without attachment, the counterweight must be removed, consult your
CASE CONSTRUCTION Dealer.
Removing the attachment from the machine
WARNING
Improper operation or service of this machine can result in an accident.
Assign a supervisor to direct worksite operations. Agree on all safety measures, procedures, and
suitable hand signals.
Failure to comply could result in death or serious injury.
WARNING
Crushing hazard!
The lifting systems must be operated by qualified personnel who are aware of the correct procedures
to follow. Make sure all lifting equipment is in good condition, and all hooks are equipped with safety
latches.
Failure to comply could result in death or serious injury.
WARNING
Crushing hazard!
This operation may be dangerous. You are advised to wear suitable clothing and respect all relevant
safety messages.
Failure to comply could result in death or serious injury.
WARNING
Pressurized system!
Before removing the attachment from the machine, make sure the air pressure and hydraulic oil pres-
sure are at zero.
Failure to comply could result in death or serious injury.
The use of lifting systems is necessary for removal and installation of the machine attachment and counterweight.
Refer to the Service Manual or consult your CASE CONSTRUCTION Dealer.
NOTICE: Prevent dust and contamination entering open circuits. Any contamination of circuits can cause malfunction
of the machine.
By rail
Since transport by rail is subject to special regulations, consult an approved organization.

5 - TRANSPORT OPERATIONS

OPERATIONS###_5_###
5-1
W0287A
W0256A
W0283A
W0284A