Fluids, Fuels And Lubricants - Case CX145C SR Operator's Manual

Fluids, fuels and lubricants

Lubricants must have the correct properties for each application.
NOTICE: The conditions of use for individual fluids and lubricants must be respected.
ATTENTION: When using the machine in a hot or cold region, consult your CASE CONSTRUCTION Dealer.
Hydraulic fluid
CASE A H
KCELA YDRAULIC EXCAVATOR FLUID
CONSTRUCTION hydraulic system. The type of fluid to be used depends on the ambient temperature.
Temperate climates:
-20 °C (-4.0 °F) to 40 °C (104.0 °F).
CASE A H
KCELA YDRAULIC EXCAVATOR FLUID
(MS1230. ISO VG 46. DIN 51524 PART 2 HV)
Hot climates:
0 °C (32.0 °F) to 50 °C (122.0 °F).
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "HOT CLIMATE"
(MS 1216. ISO VG 68. DIN 51524 PART 3 CATEGORY HVLP)
Cold climates:
-25 °C (-13.0 °F) to 20 °C (68.0 °F).
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "COLD CLIMATE"
(MS 1216. ISO VG 32. DIN 51524 PART 2)
Biodegradable fluid:
-30 °C (-22.0 °F) to 40 °C (104.0 °F).
This yellow-coloured fluid is miscible with standard fluid. If used to change standard fluid, it is advisable to drain the
circuit completely before refilling with this fluid.
CASE A H
KCELA YDRAULIC EXCAVATOR FLUID
(MS 1230. ISO VG 46. DIN 51524 PART 2 HV)
Transmission component oil
Extreme pressure oil used for enclosed transmission components.
CASE A G 135 H EP 80W-90
KCELA EAR
(SAE 80W-90. API GL 5. MIL-L-2105 D. MS 1316. ZF TE-ML 05A)
Grease
CASE A 251H EP M
KCELA
"Extreme Pressure" multipurpose grease with lithium soap and calcium.
Engine oil
The CASE T LE E
UTELA
in all working conditions.
If the CASE T LE E
UTELA
ACEA E6. API CJ-4.
is specially designed for high pressure applications and for the CASE
BIO
-
ULTI PURPOSE GREASE
O is recommended for your engine. This oil ensures correct lubrication of your engine
NGINE IL
O cannot be obtained, use the oil corresponding to one of the following categories:
NGINE IL
6 - MAINTENANCE
(NLGI 2)
6-5