Case CX145C SR Operator's Manual page 159

10. Operate the bucket control to retract the cylinder rod
and allow the safety device to engage.
Disassembly
1. Operate the arm and bucket controls so that the arm is
practically vertical, sloping slightly towards the cab, to
release the safety device. Extend the bucket cylinder
rod completely and maintain the hydraulic pressure so
that the latching hook retracts.
2. Place the switch (1) in unlocking position. The audible
alarm device will sound. (Refer to page3-56).
3. Operate the bucket control to lay the bucket safely on
flat, level ground.
4 - OPERATING INSTRUCTIONS
4-27
10
TX8XZ1-009A
11
KKZVLU-021A
12
6B4353DF
13
KKZVLU-023A