Fuses - Case CX145C SR Operator's Manual

6 - MAINTENANCE

Fuses

NOTE: Before changing fuses or relays, turn the ignition
key to the "Shut down" position, wait one minute minimum
and place the key of the battery master switch in "O" (Off)
position (if equipped).
ATTENTION: Never replace a fuse with a fuse of a differ-
ent amperage.
To access the fuse box, open the cover located behind the
operator's seat.
1
4E4FFA9E
To access the fuses, remove the cover on the box. A
notice on the cover gives the function and amperage of
each fuse.
NOTE: To remove or install a fuse, use the notch in the
upper right-hand corner of the cover.
2
1D2MQ9-003
6-78