Fluid Capacities And Lubricant Specifications - Case CX145C SR Operator's Manual

Environment and ecology
Before carrying out any maintenance operation on this machine and before disposing of used fluids or lubricants,
always think of the environment. Never throw oil or fluid on the ground and never place it in leaking receptacles.
Consult your local ecological recycling center or your CASE CONSTRUCTION Dealer to obtain information on the
correct method of disposing of these lubricants.
Soil, air and water are vital factors of life in general. When legislation does not yet rule the treatment of some of the
substances which are required by advanced technology, sound judgement should govern the use and disposal of
products of a chemical and petrochemical nature.
The following are recommendations which may be of assistance:
• Become acquainted with and ensure that you understand the relative legislation applicable to your country.
• Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, antifreeze, cleaning
agents, etc., with regard to their effect on man and nature and how to safely store, use and dispose of these sub-
stances.
• Local Environmental Agency will, in many cases, be able to help you as well.

Fluid capacities and lubricant specifications

Component
Engine
Cooling system
Fuel system
Hydraulic system
Travel reduction gear
Swing reduction gear
Turntable teeth
6 - MAINTENANCE
Fluid/Lubricant type
CASE T LE E
UTELA
CASE A P
KCELA REMIUM ANTI
Refer to page 6-5
CASE A H
KCELA YDRAULIC
EXCAVATOR FLUID
CASE AKCELA GEAR 135 EP
CASE AKCELA GEAR 135 EP
CASE A 251H EP
KCELA
M -
ULTI PURPOSE GREASE
CASE A 251H EP
KCELA
M -
ULTI PURPOSE GREASE
6-9
O
NGINE IL
-
FREEZE
Reservoir 200 l (52.8 US gal)
Total system 158 l (41.7 US gal)
Reservoir 75 l (19.8 US gal)
Per reduction gear 2.1 l (0.6 US gal)
Capacity
17 l (4.5 US gal)
15.3 l (4.0 US gal)
3 l (0.8 US gal)
0.5 kg (1.1 lb)
9.9 kg (21.8 lb)