Case CX145C SR Operator's Manual page 240

Inspecting the element
Check the element for damage by placing an inspection
lamp inside the element.
ATTENTION: Change the element if light can be seen
through a hole, however small.
Installing the elements
1. Install the secondary element.
2. Install the primary element.
3. Install the cover (with the word "Top" at the top) and
close the fasteners.
4. Check that the dust ejector (1) under the filter is work-
ing correctly.
ATTENTION: If exhaust smoke is abnormal after clean-
ing, the air filter primary element must be changed.
6 - MAINTENANCE
6-50
6
RIGX2J-001
7
BABB4864
8
9506FF7B
9
7BADF666