Case CX145C SR Operator's Manual page 173

4. After switch (1) has been operated, the set flow and-
pressure will be displayed for a set amount of time.
NOTE: To prevent failure or damage to the tool, make
sure that you select the correct circuit configuration and
flow rate and pressure for the tool.
5. Proportional switch
(1) = Proportional switch (Option control switch).
(2) = Option control switch
(3) = Horn switch
(4) = Proportional switch (Option control switch)
(5) = Option control switch
(6) = Engine idle switch
4 - OPERATING INSTRUCTIONS
4-41
26
1B507B50Z
27
26D72C31
28
3207DF38