Case CX145C SR Operator's Manual page 61

Travel control levers and pedals
These levers and pedals are used to move the machine.
(Refer to page 4-15).
ATTENTION: Lock the travel pedal (1) when not in use.
See chapter "Locking the travel pedal".
NOTE: Travel speed either forward or in reverse depends
on the position of the travel speed selector. (Refer to page
3-24).
Auxiliary pedal (if equipped)
WARNING
Unexpected machine movement!
ALWAYS lock the auxiliary pedals when not in
use.
Failure to comply could result in death or se-
rious injury.
This pedal is used for optional accessories such as hy-
draulic breaker, if equipped, etc. (Refer to page 4-34).
See chapter "Adjustment and locking auxiliary pedals".
ATTENTION: Consult your CASE CONSTRUCTION
Dealer before mounting optional tools.
3 - CONTROLS/INSTRUMENTS
W0222A
3-11
9
KW9JGV-001D
10
LY2WL1-001ZA