Safety Instructions, Maintenance/Servicing; Safety During Transport - Case WX210 Service Manual

0 - 22

Safety instructions, maintenance/servicing

Safety during transport

There is a risk of the machine over-
turning when it is being loaded onto
a truck or trailer and when it is be-
ing unloaded.
Ensure that local regulations are
-
observed when the machine is be-
ing transported on the public
highway.
An appropriate truck or trailer must
-
be provided for the transport of the
machine.
When loading/unloading the ma-
chine, the following precautions
must be taken:
Find firm, horizontal ground.
-
Always use a loading platform or
-
drive-on ramp.
A marshaller must be enlisted to
-
help with loading/unloading the
machine.
When loading or unloading the
-
machine, the automatic speed re-
set must always be switched off to
prevent an unexpected increase in
speed due to inadvertent activation
of an operating lever.
Always set the transmission stage
switch to "slow".
In the "fast" transmission stage, the
travelling speed may be automati-
cally increased.
Avoid steering movements when
-
driving up or down the ramp, as
that is extremely dangerous. If
steering is absolutely essential,
first drive back onto the ground or
the loading area, correct the driv-
ing direction, and set off again.
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
SAFETY INSTRUCTIONS
Fig. 23
At the top end of the ramp, which
-
adjoins the loading area, there is a
joint. Drive over it with care.
When slewing the superstructure,
-
avoid fast movements as they
might cause the machine to over-
turn, resulting in potential injury.
Keep the stick retracted and turn
-
the superstructure slowly to en-
sure maximum stability.
Secure the machine frame with
-
chains or cables.
Details are given in the appropriate
sections of the Owner's Manual.
WX210 - WX240
40000024-en