Case CX145C SR Operator's Manual page 193

6 - MAINTENANCE
Upperstructure
• Check the fuel tank level.
• Check the hydraulic reservoir level.
• Check that the hydraulic oil is clean.
• Check the components for signs of leaking oil or water.
• Check the condition of all lines.
• Make sure there are no electrical short circuits.
• Check the battery connections are properly tightened.
• Adjust the rear view mirrors.
• Check the cameras.
Undercarriage
• Check the pad hardware.
• Check the condition of the tracks.
• Check that the upper and lower track rollers and the idler wheels are not leaking oil.
Attachment
• Check the cylinders are not leaking oil.
• Check the condition of all lines.
• Check the condition of the bucket teeth.
After starting the engine
• Did the engine start correctly? Are the exhaust fumes normal? Any strange noises?
• Check for abnormal noise on the hydraulic components.
• Check the components for signs of leaking oil or water.
• Check the audible alarm devices, working lights and windshield wipers.
• Check that all circuits (travel, swing and tool) are functioning correctly.
ATTENTION: If the slightest defect is found, repair it immediately before using the machine or consult your CASE
CONSTRUCTION Dealer.
6-3