Configuring Server Options - HP 9000 Manual

Complete the After you have Ignite-UX up and running, you will see the Welcome
Configuration:
screen and then the Ignite-UX Server GUI. When you have booted the
clients you will see client icons on the Server GUI. These can be
manipulated as follows:
• Click once on a client icon to select it for further actions.
• Click twice on the client to get a Client Status screen.
• Click the right mouse button (Mouse Button Three) on the selected
• Server Configuration: Server Options.
• Server Configuration: Session Options.
Details for these screens are on the following pages.
Configuring Server Options
The fields in these tabs ("Server Options" and "Session Options") serve to
identify and set up your installation server, and to configure the IP
source address range to be used for initially booting the install clients
(target systems) and the DHCP address range to be used for directing
the client installation process. You will see the following screen after
selecting: Options --> Server Configuration.
Chapter 4
This will start the Ignite-UX server.
client icon to get an Actions screen similar to the pulldown Actions
menu.
This allows the OS product configuration to be selected, along with
the default printer configuration, client timeout allowance, and where
the client interface will be booted from and displayed .
This configures general interaction behavior for the client sessions.
Configuring an Ignite-UX Server
Setting Up an Ignite-UX Server
71