HP 9000 Manual page 114

Installing from the Ignite-UX Server
Configuring the Installation
• Minfree
• Disk Density
• Cylinder/Group
Advanced Logical
Volume Layout Screen
Figure 5-21
Use this screen to do detailed configuring of LVM, as needed, in the
following areas:
Cont Alloc See the manpage lvcreate(1M), for more information.
(Continuous
Allocation):
B-block Relo See the manpage lvcreate(1M), for more information.
(Bad-Block
Relocation):
Stripes If two or more disks are in the volume group, then you may enable data
striping over multiple disks for performance purposes.
Configure this in case you have at least two disks in a volume group and
Stripe Size
want to reconfigure the default values computed by Ignite-UX. Ignite-UX
uses the file system block size as the default.
• Type in the stripe size you intend to use.
114 Chapter 5