HP 9000 Manual page 62

Configuring an Ignite-UX Server
Chapter Contents
The requirements for a server are outlined in "Hardware Requirements
for the Ignite-UX Server and Clients".
The steps for installing the server are outlined in "Setting Up an
Ignite-UX Server",
Installation of Ignite-UX will take care of most of the server
configuration tasks. These include setting up IP addresses and
hostnames, interface location, and client response behavior. These can
also be done outside Ignite-UX by the setup_server tool (see
setup_server(1M)) as a simple interface, or by using the Ignite-UX GUI.
The overall server setup tasks include the following:
1. Install HP-UX 10.x (if you have not already done so).
2. Install Ignite-UX tools and data.
3. Set up core software.
4. Add additional applications (optional).
5. Run ignite to complete the configuration (using the Server interface
screen) and to start the install process.
62 Chapter 4