Executing The Installation: Go; Viewing And Printing A Manifest - HP 9000 Manual

Installing from the Ignite-UX Server

Executing the Installation: Go!

Executing the Installation: Go!
Select in any Ignite-UX tab to initiate the installation. You do not
Go!
need to examine all tabs, if you simply want to do a generic installation.
1. You will then see a confirmation screen listing the disks that will be
written on during the process of installation, and a log of any
warnings or errors. This screen will allow you to Cancel before the
load begins and return to the current tab you were working in.
• If you do not wish to proceed with the installation at this time, press
.
Cancel
• The pre-install analysis display screen is scrollable. Be sure to inspect
this information and check to see that the disk(s) described in the
display list is the one you intend to install on.
• Any ERRORS which are listed must be corrected before you proceed.
As the installation proceeds, you will see a log including the warnings
and errors which may need to be addressed before proceeding.
When the installation is complete, you can print a manifest, and either
save the client data in a history directory or remove the client and its
data from the server.

Viewing and Printing a Manifest

The following screen can be accessed from the Ignite-UX server screen,
by selecting on a client icon, and then clicking on Actions → View
Manifest, or via the client actions menu (right-click on client icon).
118 Chapter 5