HP 9000 Manual page 158

Using Configuration Files
Introduction
You can also build your own config files to specify a particular building
Other Customized
Building Blocks
block you are interested in, and then combine them in arbitrary ways.
These building block config files should be located in
/var/opt/ignite/data/Rel_{release}/*.
Combining Config The grouping of config files into useful configurations is accomplished in
Files Via INDEX
the INDEX file (/var/opt/ignite/ INDEX). This file contains a list of
Entries
valid configurations, each of which is made up of one or more config files.
The list of these configurations is presented in the UI as the basic
starting point. For example, the INDEX file might contain the following:
llation
158
You can create your own default configurations via the UI and save
them for future use. For example, you might have a large number of
users with similar machines who all run CAD tools. You could build a
configuration which matches what they need and save it in a
configuration called "CAD System". When you need to install a new
system of this type, you can select "CAD System" from the UI and
you're done (or you could customize it further using "CAD System" as
a starting point). Saved configurations are located in
/var/opt/ignite/saved_cfgs/*.
cfg "HP-UX B.10.20 Default"
description "This selection supplies the default
system configuration that HP
supplies for the B.10.20
release."
"/opt/ignite/data/Rel_B.10.20/config"
"/var/opt/ignite/data/Rel_B.10.20/core_700_cfg"
"/var/opt/ignite/data/Rel_B.10.20/core_800_cfg"
"/var/opt/ignite/data/Rel_B.10.20/apps_700_cfg"
"/var/opt/ignite/data/Rel_B.10.20/apps_800_cfg"
"/var/opt/ignite/data/Rel_B.10.20/patches_700_cfg"
"/var/opt/ignite/data/Rel_B.10.20/patches_800_cfg"
"/var/opt/ignite/config.local"
}
cfg "CAD System - 10.10" {
description "This selection is the typical CAD system insta
for HP-UX B.10.10"
"/opt/ignite/data/Rel_B.10.10/config"
"/var/opt/ignite/data/Rel_B.10.10/core_700_archive_cfg"
"/var/opt/ignite/data/Rel_B.10.10/apps_700_cfg"
"/var/opt/ignite/data/Rel_B.10.10/patches_700_cfg"
"/var/opt/ignite/config.local"
} = TRUE
{
Appendix B