HP 9000 Manual page 112

Installing from the Ignite-UX Server
Configuring the Installation
3. Indicate whether Media Init is required, by clicking on the selection
4. Select
5. Select
Tracks per Cylinder • Select a disk by clicking on its entry in the list displayed.
• Edit the Trks/Cyl field as needed, using the backspace and left/right
• Select the
• Select
Disk RPM • Select a disk by clicking on its entry in the list displayed.
• Edit the Disk RPM field as needed, using the backspace and left/right
• Select the
• Select
• Select a disk by clicking on its entry in the list displayed.
Media Init
• Select the Media Init button to open the selection list.
• Select "Yes" or "No". If this is set to "Yes", you will also see the
• Select the
• Select
For more information, refer to the man pages for the following:
• mkfs_vxfs(1M).
• mkfs_hfs(1M).
• mediainit(1).
Intrlv This field is available if Mediainit is set to "Yes".
112
box and selecting a choice, as needed.
to configure changes.
Modify
, to leave Advanced Disk Parameters and return to the File
OK
System tab.
arrow keys.
button, to execute any changes.
Modify
, to leave this screen and return to the File System tab.
OK
arrow keys.
button, to execute any changes.
Modify
, to leave this screen and return to the File System tab.
OK
Interleave field.
button, to execute any changes.
Modify
, to leave this screen and return to the File System tab.
OK
Chapter 5