HP 9000 Manual page 49

Welcome!
Figure 3-9
========================================================================
Use the <tab> key to navigate between fields, and the arrow keys
within fields.
Use the <return> or <space-bar> to pop-up a choices list.
menus are not clear, select the "Help" item for more information.
Hardware Summary:
+----------------------------------------------------------+ [ Scan Again
| Disks: 4 ( 5.8GB) |
| CDs: 1
| Graphics Ports: 1
+----------------------------------------------------------+
[ Reboot
=========================================================================
This Terminal User Interface (TUI) screen summarizes the information
found by an initial scan of your target hardware.
• Tab to "H/W Details" and press
• Tab to "Install HP-UX" and press
• Tab to "Run a Recovery Shell" to manually run HP-UX commands, for
Chapter 3
Welcome to Ignite-UX!
Use the <return/enter> key to select an item.
System Model: 9000/712/80
Floppies: 1
| Tapes:
| IO Buses: 2
[ Install HP-UX
[ Run a Recovery Shell
[ Advanced Options
]
hardware. (You can also do the same thing by pressing
"Shortcuts" note).
the installation.
example, in order to recover a system that has crashed. From the
interactive shell, the /sbin/loadfile command can be used to load
commands that you may need to recover the system. This function is
for advanced users only.
| LAN cards:
0 | Memory:
|
]
]
]
[
to get a detailed scan of your
Enter
to continue with configuring
Enter
Installing From Media
Booting the Target System
If the
2 |
32Mb |
| [ H/W Details ]
Help ]
— see the
D
]
49