Cypress WICED CYW920706WCDEVAL Hardware User's Manual page 20

CYW20706
Schematic Signal Name
Pin
F8 BT_DEV_WAKE/P36/P38
G8 BT_CLK_REQ/P4/P24
CYW920706WCDEVAL Hardware User Guide
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Bonded
GPIOs Default
State
P25 Floating I (master)
P32 Floating I/O
3
BT_DEV_WAKE LOW
P36 Floating O (master)
P38 Floating I/O
P4 Floating I/O
P24 Floating I/O
Table 7-2. CYW920706WCDEVAL Board Interface Summary
I/O Type
SPI1_MISO (master or slave). To use, disable I/O P32.
O (slave)
No specific function defined. It can be monitored at J19-4 if I/O P2
I A signal from the host to CYW20706 that the host requires attentio
GPIO_P36 programmed as SPI1_CS. To use, disable I/O P38.
I (slave)
No specific function defined. It can be monitored at J19-6 if I/O P3
No specific function defined. It can be monitored at J19-3 if I/O P2
SPI1_CLK (master or slave). To use, disable I/O P4.
Doc. No.: 002-16535 Rev. **
Description
Signal Function and Notes