Cypress PSoC 62S1 Wi-Fi BT Pioneer Kit Manual
  1. Manuals
  2. Brands
  3. Cypress Manuals
  4. Motherboard
  5. PSoC 62S1 Wi-Fi BT Pioneer Kit
  6. Manual

Cypress PSoC 62S1 Wi-Fi BT Pioneer Kit Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CYW9P62S1-43438EVB-01
PSoC 62S1 Wi-Fi BT Pioneer Kit Guide
Doc. # 002-28692 Rev. **
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134-1709
Phone (USA): 800.858.1810
Phone (Intnl): +1.408.943.2600
www.cypress.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSoC 62S1 Wi-Fi BT Pioneer Kit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cypress PSoC 62S1 Wi-Fi BT Pioneer Kit

Summary of Contents for Cypress PSoC 62S1 Wi-Fi BT Pioneer Kit

  • Page 1 CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide Doc. # 002-28692 Rev. ** Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): +1.408.943.2600 www.cypress.com...
  • Page 2 High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a Cypress product as a Critical Component in a High-Risk Device.

  • Page 3: Table Of Contents

    3.2.12 PSoC 6 USB ....................42 3.2.13 Potentiometer....................42 PSoC 62S1 Wi-Fi BT Pioneer Kit Rework ..............43 3.3.1 ETM Trace Header..................43 Bill of Materials ......................43 Frequently Asked Questions..................44 Revision History CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 4: Safety And Regulatory Compliance Information

    The end-of-life cycle for this kit is five years from the date of manufacture mentioned on the back of the box. Contact your nearest recycler to discard the kit. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 5 Handling Boards CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit is sensitive to ESD. Hold the board only by its edges. After removing the board from its box, place it on a grounded, static-free surface.

  • Page 6: Introduction

    Introduction Thank you for your interest in the CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit. The PSoC 62S1 Wi-Fi BT Pioneer Kit enables you to evaluate and develop your applications using the PSoC 62 Series MCU (hereafter called “PSoC 6 MCU”) and CYW43438 Wi-Fi/BT combo device.

  • Page 7: Kit Contents

    Quick Start Guide ■ Figure 1-1. Kit Contents Inspect the contents of the kit; if you find any part missing, contact your nearest Cypress sales office for help: www.cypress.com/support. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 8: Getting Started

    Introduction Getting Started This guide will help you get acquainted with the PSoC 62S1 Wi-Fi BT Pioneer Kit: Kit Operation chapter on page 11 describes the major features of the PSoC 62S1 Wi-Fi BT ■ Pioneer Kit and functionalities such as programming, debugging, and the USB-UART and USB- C bridges.

  • Page 9: Additional Learning Resources

    Analog-to-Digital Converter Bluetooth Low Energy Bill of Materials Bluetooth CINT Integration Capacitor CMOD Modulator Capacitor Central Processing Unit CapSense Sigma Delta CapSense Crosspoint Direct Current Del-Sig Delta-Sigma CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 10 Serial Peripheral Interface SRAM Serial Random Access Memory Serial Wire Debug UART Universal Asynchronous Receiver Transmitter Universal Serial Bus Watch Crystal Oscillator WLAN Wireless Local Area Network CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 11: Kit Operation

    Port Interface & Digital System Interconnect (DSI) BREG Power Modes High Speed I/O Matrix, Smart I/O, Boundary Scan Active/Sleep LowePowerActive/Sleep DeepSleep 104 GPIOs (6 of these are OVT Pins) Hibernate IO Subsystem Backup CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 12 Figure 2-3. Block Diagram of CYW9P62S1-43438CAR-01 Carrier Module PSoC 6 MCU GPIOs (66 I/Os) XRES BT UART (4 I/Os) Control (2 I/Os) WL GPIO (1 I/O) BT I2S (4 I/Os) SDIO (6 I/Os) Carrier  Note: Inside AZW module, SDIO interface is connected  AZW PCB  only to PSoC 6 MCU, not connected to carrier module  Module  footprint Crystal Module Footprint VDDA (1.8V – 3.3V) 17.2032 MHz  VDDD (1.8V – 3.3V) VDDIO2 (1.8V) VDD_NS (1.8V – 3.3V) VBACKUP (1.8V – 3.3V) VDDUSB (2.7V ‐ 3.3V) VBAT (3.2V – 4.2V) VDDIO_WL (1.8V) CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 13 IO1 (J22.2) User button with GPIO on non-Arduino P0[4] Hibernate wakeup – header (J21.9) capability RGB green LED GPIO on non-Arduino P0[5] – (LED5) header (J24.3) CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 14 CapSense CINTB – – RGB blue LED GPIO on non-Arduino P7[3] – (LED5) header (J24.5) P7[4] Arduino D9 (J3.2) – – P7[5] Arduino D8 (J3.1) – – CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 15 P9[3] ETM TRACEDATA[0] Populate R129 to connect to ETM Trace A11 (J2.8) header. Extended Arduino P9[4] – – A12 (J2.10) Extended Arduino P9[5] – – A13 (J2.12) CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 16 Host MCU (PSoC 6 – – MCU) UART interface with BT_UART_RXD Host MCU (PSoC 6 – – MCU) UART interface with BT_UART_CTS Host MCU (PSoC 6 – – MCU) CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 17 – WL_GPIO_2 Programable GPIO – – The CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit comes with the PSoC 62S1 Wi-Fi BT Pioneer Board. Figure 2-5 Figure 2-6 show the markup of the Pioneer Board. Figure 2-5. PSoC 62S1 Wi-Fi BT Pioneer Board - Top View...
  • Page 18 Before populating the jumper for making current measurements, ensure that R97 is removed. 8. External power supply VIN connector (J5): This connector connects an external DC power supply input to the onboard regulators. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 19 CYW43438 VDDIO power domain. 20. Cypress serial NOR flash memory (S25FL512S, U3): A S25HL512S NOR flash of 512-Mbit capacity is connected to the Quad SPI interface of the PSoC 6 MCU. The NOR device can be used for both data and code memory with execute-in-place (XIP) support and encryption.
  • Page 20 SWD programmer, debugger, USB-I2C bridge and USB-UART bridge. For more details, see KitProg3 User Guide. Hardware Functional Description on page 27 for details on various hardware blocks. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 21: Kitprog3: On-Board Programmer/Debugger

    The PSoC 62S1 Wi-Fi BT Pioneer Board can be programmed and debugged using the onboard KitProg3. KitProg3 is an onboard programmer/debugger with additional USB-UART and USB-I2C functionality. A Cypress PSoC 5LP device is used to implement the KitProg3. For more details on the KitProg3 functionality, see the KitProg3 User Guide.
  • Page 22 Next. Figure 2-10. New Application Creation: Choose Starter Application d. Click Finish in the Summary window, as shown in Figure 2-11. Figure 2-11. New Application Creation: Summary CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 23 <App_Name> Debug (KitProg3) configuration as shown in Figure 2-13. For a detailed explanation on how to debug using ModusToolbox, see KBA224621. Figure 2-13. Debugging in ModusToolbox CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 24 6. Press the Enter key again. Confirm that the kit LED resumes blinking at 1 Hz. The message displayed on the terminal is updated to “LED blinking resumed”. You can repeat steps 5 and 6 indefinitely. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 25: Usb-Uart Bridge

    The secondary UART and flow-control lines between the CYW43438 and the KitProg3 are hard- wired on the board, as Figure 2-16 shows. Figure 2-16. UART Connection between KitProg3 and CYW43438 CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 26: Usb-I2C Bridge

    USB-I2C supports I2C speeds of 50 kHz, 100 kHz, 400 kHz, and 1 MHz. For more details on the KitProg3 USB-I2C functionality, see the KitProg3 User Guide. Figure 2-17. I2C Connection between KitProg3 and PSoC 6 MCU CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 27: Hardware

    GND_9 GND_35 GND_10 GND_36 GND_11 GND_37 GND_12 GND_38 GND_13 GND_39 GND_14 GND_40 GND_15 GND_41 GND_16 GND_42 GND_17 GND_43 GND_18 GND_44 GND_19 GND_45 GND_20 GND_46 GND_21 GND_47 AW-CU427-01H CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 28 SDIO_CMD SDIO_CMD SDIO_CLK BT_REG_ON SDIO_CLK BT_REG_ON WL_REG_ON WL_REG_ON BT_PCM_CLK/I2S_CLK BT_I2S_CLK BT_I2S_DI BT_PCM_IN/I2S_DI WL_GPIO_1 WL_GPIO1 BT_PCM_OUT/I2S_DO BT_I2S_DO WL_GPIO_2 WL_GPIO2 BT_PCM_SY NC/I2S_WS BT_I2S_WS AW-CU427-01H ECO_P12_6 17.2032MHz 10pF 10pF ECO_P12_7 CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 29 BUTTON_2 P0_2 MCU_IO_0 P0_3 MCU_IO_1 XRES_L P1_3 MCU_XRES_L MCU_IO_2 P6_4 MCU_TDO MCU_IO_3 P6_5 P8_0 MCU_TDI MCU_IO_4 P6_6 P12_4 MCU_TMS_SWDIO MCU_IO_5 P6_7 P12_5 MCU_TCLK_SWCLK MCU_IO_6 Carrier Module Footprint CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 30 BT_I2S_DO BT_I2S_DO BT_I2S_DI WL_UART_RX BT_I2S_DI VDDIO_WL WL_IO_1 WL_GPIO_2 WL_IO_2 BT_IO_2 BT_IO_3 WL_JTAG_TCK BT_IO_4 WL_JTAG_TMS BT_IO_5 WL_GPIO_2 WL_JTAG_TRST_L WL_JTAG_TDI RFU_1 WL_JTAG_TDO RFU_2 WL_GPIO_1 WL_JTAG_SEL LPO_IN Carrier Module Footprint CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 31: Psoc 5Lp-Based Kitprog3 (U2)

    KP_I2C_SCL P1[3] P12[0] P5LP1_4 P1[4] P3[7] KP_GPIO_1 P1[5] P3[6] P5LP_VDD VDDIO1 VDDIO3 P5LP_VDD P5LP_VDD P5LP_VCCD KP_GPIO_0 UART_1_RTS USB_V_SENSE UART_1_TX VTARG_MEAS UART_1_RX KP_USB_DP KP_USB_DM Del-Sig Bypass Capacitor UART_2_RX CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 32: Serial Interconnection Between Psoc 5Lp And Psoc 6 Mcu

    0 OHM UART_1_RTS UART_1_TX ARD_D0 R115 0 OHM 74LVC1T45DW-7 No Load 0.1uF 0.1uF 0 OHM VCCA VCCB B_UART_1_CTS ARD_D2 B_UART_1_CTS UART_1_CTS 0 OHM B_UART_1_RTS ARD_D3 100K 74LVC1T45DW-7 CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 33: Serial Interconnection Between Psoc 5Lp And Cyw43438

    10118194-0001LF TP23 KP_VBUS P6_VBUS 100K 100K 10nF RCLAMP0854P.TCT 10nF RCLAMP0854P.TCT 0.1uF 0.1uF Power Supply 'OR'ing USB_Hold VCC_IN USB_Hold JMP1 PMEG3020BEP JMP2 KP_VBUS PMEG3020BEP P6_VBUS PMEG3020BEP No Load CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 34 0 OHM output will be 2.5V. No Load VCC_1V8 1.8V Voltage Regulator VCC_IN 4.7uH 1.8V 600mA 10nF 10uF 0.1uF 47pF 40.2K 22uF 10uF 0.1uF PMEG3020BEP AOZ1280CI B_KP_PMIC_EN 32.4K CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 35 3.3V. Figure 3-8 shows the schematics of the voltage selection circuits. Figure 3-8. Voltage Selection VDDIO0 Voltage Selection VCC_3V3 VCC_VDDIO0 VCC_1V8 0 OHM 0 OHM No Load CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 36 Note: When measuring P6_VDD current, make sure that the J25 jumper is removed. This will disconnect the potentiometer from VDDA and removes the leakage caused by it. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 37: I/O Headers

    BT_UART_TXD O_LED_L RGB_R_LED_L BT_I2S_DO BT_UART_CTS R_LED_L RGB_G_LED_L BT_I2S_DI BT_UART_RTS IO16 RGB_B_LED_L BT_GPIO_2 WL_UART_RX BT_GPIO_3 WL_UART_TX CON 3x2 BT_GPIO_4 WL_GPIO_1 No Load BT_GPIO_5 WL_GPIO_2 CON 8x2 No Load CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 38: Capsense Circuit

    Simultaneous GPIO switching with unrestricted drive strengths and frequency can affect CapSense and ADC performance. For more details, see the Errata section of the corresponding device datasheet. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 39: Leds

    0 OHM LED8 ORANGE O_LED_L VDDIO0 LED9 R_LED_L Power LED VCC_3V3 390 OHM LED1 Y ELLOW NX3020NAKW,115 P6_VDD_BUF KitProg3 Status LED 100K P5LP1_4 750 OHM LED2 Y ELLOW CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 40: Push Buttons

    3.2.10 Cypress Quad SPI NOR Flash The PSoC 62S1 Wi-Fi BT Pioneer Board has a Cypress NOR flash memory (S25FL512SAGM- FI010) of 512Mb capacity. The NOR flash is connected to the Quad SPI interface of the PSoC 6 MCU device. The NOR flash device can be used for both data and code with execute-in-place (XIP) support and encryption.

  • Page 41: Cypress Quad Spi F-Ram

    Figure 3-15. Schematics of Quad SPI F-RAM VCC_VDDIO0 FRAM_VDD Quad SPI F-RAM R109 0 OHM TP10 FRAM_VDD FRAM_VDD R113 FRAM_SS_L QSPI_IO1 QSPI_IO3 SO/IO1 RESET/IO3 QSPI_SCK QSPI_IO2 WP/IO2 0.1uF QSPI_IO0 SI/IO0 CY 15B104QSN CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 42: Psoc 6 Usb

    P6_VDD. Remove jumper J25 to disconnect power from the potentiometer when measuring P6_VDD current. Figure 3-17. Schematics of Potentiometer VDD_POT Potentiometer HDR2 VDDA VDD_POT 3386P-1-103TLF 0 OHM ARD_A6 R170 0 OHM No Load 0.1uF CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 43: Psoc 62S1 Wi-Fi Bt Pioneer Kit Rework

    R127 0 OHM TRACEDATA_2 No Load PAD_A8 R125 0 OHM R126 0 OHM TRACEDATA_3 No Load Bill of Materials Refer to the BOM files in the webpage. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 44: Frequently Asked Questions

    Any kind of overlays (up to 5-mm thickness) like wood, acrylic, and glass can be used with CapSense. Note that additional tuning may be required when the overlay is changed. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...
  • Page 45 J11 and J12 Note: If R130 is loaded and external power is used, make sure to remove resistor R83 to prevent reverse voltage to on-board regulator CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

  • Page 46: Revision History

    Document Revision History Document Title: CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide Document Number: 002-28692 Revision Issue Date Description of Change Number 6700080 11/05/2019 New kit guide. CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. **...

This manual is also suitable for:

Cyw9p62s1-43438evb-01

Table of Contents