Cypress CYW954907AEVAL1F Quick Start Manual

CYW954907AEVAL1F EVALUATION KIT QUICK START GUIDE
CYW954907AEVAL1F EVALUATION KIT
1. Register on Cypress WICED Community
and then download and install WICED
Studio 6.0 (or later) at
www.cypress.com/products/wiced-software.
2. Plug the kit into a USB port on your
computer.
3. Open a Serial Terminal Emulator with a
baud rate of 115200.
4. Every 5 seconds the kit will scan for
Wi-Fi networks.
Note : If drivers do not install automatically,
they can be found in the SDK installation folder
Kit Contents:
1 CYW954907AEVAL1F
Evaluation board
2 USB Standard-A to Micro-B cable
3 Quick Start Guide (this document)
www.cypress.com/CYW954907AEVAL1F
1
1. Download the kit user guide from
www.cypress.com/CYW954907AEVAL1F
2. Follow the instructions in the user guide
to program the kit, and use the provided
examples.
3. The example pre-programmed into the
kit is called snip.scan in WICED Studio.
2