2) Insert the pins of the mirror positioning
tool (front [2]/rear [3]) into each of the
holes [1]: No. 1 mirror base, No. 2 mir-
ror base, and rail. The position of the
No. 2 mirror base is adjusted by sliding
the cable fixing plate to the front and
the rear.
3) Secure the end of the cable so far tem-
porarily fixed to the hook of the reader
frame using a spring.
4) Fully tighten the screw on the cable fix-
ing plate.
5) Fully tighten the cable metal fixing on
the No. 1 mirror base.
6) Detach the mirror positioning tool.
7) Reverse steps 1) through 6) for mount-
ing.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
[2]
[1]
F02-202-02
[3]
[1]
F02-202-03
2-11