4.4 Orientation of the Pickup Roller of the Side Paper Deck
The pickup roller may be mounted by reversing the steps used to remove it; however, be
sure to keep the following in mind:
•
The pickup rollers used at the front and the rear of the machine are not interchangeable.
•
The collar of the pickup roller used at the front of the machine is silver-colored.
When mounting the pickup roller [1] to the pickup assembly, be sure that the round mark-
ing [2] found on the collar (silver-colored) is toward the front of the machine.
(direction of rotation)
[1] Pickup roller
[2] Marking (on collar)
•
The collar on the pickup roller found at the rear of the machine is gold-colored.
When mounting the pickup roller [4] to the pickup assembly, be sure that the round mark-
ing [5] found on the side of the roller and the round marking [6] found on the collar (gold-
colored) are toward the rear of the machine.
(direction of rotation)
[4] Pickup roller
[5] Marking (roller)
[6] Marking (collar)
CHAPTER 2 STANDARDS AND ADJUSTMENTS
Collar (silver-colored)
[1]
F02-404-01
Collar (gold-colored)
[4]
F02-404-02
[2]
(front of machine)
[5]
[6]
(rear of machine)
2-29