REA JET HR pro 2K User Manual page 2

Imprint
Version:
Article no.:
Technical editing:
The present instruction manual for the marking system
REA JET HR pro 2K/4K is based on the following software versions:
REA JET HR pro 2K
REA JET HR pro 4K
© 2015 REA Elektronik GmbH, all rights reserved
Although this document has been created with the utmost care, some information may be in-
correct and contain errors. REA Elektronik GmbH assumes no responsibility or liability for
damages that may result from incorrect information.
REA Elektronik GmbH constantly endeavors to improve its products and reserves the right to
change information and data contained in this document without prior notice.
No part of this instruction manual may be reproduced in any way, or be processed, multiplied
or distributed by electronic means.
Instruction manual
REA JET HR pro 2K / 4K
V 3.5x_001 28.05.2015
 This instruction manual must be read
prior to commissioning.
 The safety instructions must be
observed.
 These instructions must be kept with the
device.
Page 2 / 189
3.5x_001 deutsch
054.xxx.xxx
Rainer Wiefelspütz
Manuela Magsam
SW: 3.5x
SW: 3.5x
REA Elektronik GmbH
Teichwiesenstraße 1
D-64367 Mühltal
Tel.: +49 (0) 6154-638-0
Fax: +49 (0) 6154-638-195
E-mail: info@rea-jet.de
Copyright © REA Elektronik