REA JET HR pro 2K User Manual page 159

12 Clock source
Instruction manual
REA JET HR pro 2K / 4K
V 3.5x_001 28.05.2015
Here the currently (in the system settings) selected clock
source with the respective speed information is shown.
For internal clock:
For installed shaft encoder:
This view also shows the turning direction. If the shaft encoder
turns in the opposite direction of the specification in the system
settings, a yellow warning triangle appears about the symbol of
the shaft encoder.
Display with correct RE direction!
Display with incorrect RE direction!
Page 159 / 189 Copyright © REA Elektronik