2. Getting Started
Changing Modes
• You cannot switch modes in any of the following situations:
• While scanning an original using the scanner function
• When accessing User Tools / Inquiry
• During interrupt copying
• The [Top] screen is set as the default screen when the machine is turned on. You can change this
default setting under Function Priority. See "System Settings", Connecting the Machine/ System
Settings.
Displaying the [Home] Screen
1.
Press the [Home] key.
If the [Home] screen does not appear, press the
switch to the menu screen.
• Function or shortcut icons will be displayed on the [Home] screen. For details, see page 46 "How
to Use the [Top] Screen and the [Home] Screen".
• To use a different function, press the icon of the function you want to use. For details, see
page 49 "Changing Modes by Pressing the Icons on the [Home] Screen".
How to Use the [Top] Screen and the [Home] Screen
The [Top] screen is displayed when the machine is turned on.
Using the [Top] screen, you can check the job list, toner status, and paper status.
The icons of each function are displayed on the [Home] screen.
46
icon at the upper right corner of the screen to
CWW220