Getting Started; Overview Of This Machine; Names Of Major Features; Model-Specific Information - Ricoh Pro C7100s Operating Instructions Manual

2. Getting Started

This chapter describes preparations for using the machine, operating instructions, and character input
methods.

Overview of This Machine

Names of Major Features

In this manual, major features of the machine are referred to as follows:
• Auto Document Feeder
• Multi Bypass Tray BY5010
• Wide Large Capacity Tray
LCT and the two-tray wide LCT)
• LCIT RT5090 Three-tray wide Large Capacity Tray (Three-tray wide LCT)
• Vacuum Feed LCIT RT5100
• Multi-Folding Unit FD5020
• Decurl Unit DU5040
• Buffer Pass Unit Type S3
• Ring Binder RB5020
• High Capacity Stacker SK5030
• Trimmer Unit TR5040
• Cover Interposer Tray CI5030
• Perfect Binder GB5010
• Tab Sheet Holder Type 3260

Model-Specific Information

This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
ADF
Multi bypass tray (Tray A)
Wide LCT (in this manual, "wide LCT" refers to the three-tray wide
Two-tray wide Large Capacity Tray (Two-tray wide LCT)
Multi-folding unit
Decurl unit
Buffer pass unit
Ring binder
High capacity stacker
Trimmer
Interposer
Perfect binder
Tab sheet holder
21