Table of Contents
Advertisement
Changing Modes
Note
❒ You cannot switch modes during initial setup.
❒ The copying screen is displayed as default after power on. You can change
this default setting. For the setting procedure, see "Function Priority", General
Settings Guide.
❒ If the Function Upgrade Option is not installed, only TWAIN scanning is
available.
❒ The following illustrations show screens that appear if the Function Upgrade
Option is installed.
❖ System Reset
The screen specified in Function Priority appears automatically after a certain
period of time has elapsed. This function is called "System Reset". You can
change the System Reset time in "System Auto Reset Timer", General Settings
Guide.
Changing Modes
AMA026S
1
21
Advertisement
Table of Contents
