Ricoh Pro C7100s Operating Instructions Manual page 178

4. Paper Specifications and Adding Paper
of the paper, the machine may not detect a multi-sheet feed correctly. For details about Adjustment
Settings for Operators, see "Adjustment Settings for Operators", Paper Settings.
• Flatten out curled sheets before loading them.
• The Adjust Paper Curl function might not be able to fully remove curl, depending on the type of
paper and the direction of its grain. If long grain paper does not uncurl properly, try short grain
paper instead. For details about the Adjust Paper Curl function, see "Adjustment Settings for
Operators", Paper Settings.
• Depending on the paper's size, weight, and type, the copy/print speed may be slower than usual.
• When loading envelopes, see page 177 "Envelopes".
• When copying or printing onto letterhead paper, the paper placing orientation is different
depending on which function you are using. For details, see page 135 "Loading Orientation-fixed
Paper or Two-sided Paper".
• If you load paper of the same size and same type in two or more trays, the machine automatically
feeds from one of the trays in which [Yes] is selected for [Apply Auto Paper Select] when the first
tray in use runs out of paper. This function is called Auto Tray Switching. This saves interrupting a
copy run to replenish paper when making a large number of copies. You can specify the paper
type of the paper trays under [Paper Type] tab. For details, see "Tray Paper Settings", Paper
Settings. For the setting procedure of the Auto Tray Switching function, see "General Features",
Copy/ Document Server.
• The paper types you can select in Tray Paper Settings are only general classifications. Print quality
for every kind of paper in a classification is not guaranteed. For details, see page 179 "Unusable
Paper".
• If the surface of the paper is dusty, white spots might appear on prints. To remove dust, fan the
paper thoroughly.
• When loading label paper:
• Select [Label Paper] for [Paper Type] in [Tray Paper Settings], and select an appropriate
paper thickness under [Paper Weight].
• When loading transparencies:
• When copying onto transparencies, see "Copying onto Transparencies", Copy/ Document
Server.
• To print on transparencies, select [Transparency] for [Paper Type] in [Tray Paper Settings].
• When you load transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
• Fan transparencies thoroughly whenever you use them. This prevents transparencies from
sticking together, and from feeding incorrectly.
• Remove copied or printed sheets one by one.
• When loading translucent paper:
176