Ricoh Pro C7100s Operating Instructions Manual page 141

Hide thumbs Also See for Pro C7100s:
Table of Contents

Advertisement

• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the
side fences are squeezed too tightly against the paper, the edges may crease, the paper may
misfeed, or if it weighs between 52.3–63.0g/m
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2.
Remove paper if loaded.
3.
Release the lock on the side fences.
2
(14.0–16.9 lb. Bond), it may wrinkle.
DER060
DER062
Changing the Paper Size
139

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro c7100sxPro c7110sPro c7110sx

Table of Contents