Putting A Call On Hold; Music On Hold; Dialing A New Call While On A Call - 3Com 3102 Manual

60 C 7: B
HAPTER ASIC
Putting a Call
on Hold

Music on Hold

Dialing a New Call
While on a Call
T O
ELEPHONE PERATION
The headset amplifier buttons for Mute and On are both set to On.
The handset is off the phone for a long time (for example, overnight).
It may take a few minutes for your headset to return from the
power-saving mode to the active mode when calls first come in, so your
telephone may not ring until the headset has returned to active mode,
and you may miss a call.
If you plan to not use the headset for a long time, 3Com recommends
that you set the mute and headset buttons on the amplifier to Off and
hang up the handset on your telephone. When you are ready to receive
calls again, set up the headset for receiving calls:
1 Pick up the handset on your telephone and set it on your desk.
2 Put on the headset.
3 On the amplifier, set the headset button to On.
To put a call on hold:
1 While you are on a call, press the Hold button. This message appears in
the Display Panel: Hold
2 To return to the call, press the Hold button again or press the appropriate
Access button.
If configured by the administrator, callers on hold hear music while they
wait.
You can put a call on hold, dial a new call, and toggle between the two
calls:
1 While on a call, press the Hold button to put the current call on hold.
2 Press an unused Access button (on the Model 2101 phone, which has no
Access button, press Toggle).
3 Dial the second call.
4 To toggle between the two calls, put the current call on hold and then
press the Access (or Toggle) button for the call you want to resume.