Service Call Conditions; Sc Code Display Patterns And How To Clear Them - Ricoh Haokan-P1T Field Service Manual

No. Message
19 Temp. alert
Please wait...
20 Top Cover is open
close it to / restart
machine /Power
Off On
21 Used Ink Collect
Unit is set/
Replace Ink
Collector Unit
22 Open Front
Cover /Replace
Ink Crtg

Service Call Conditions

SC code display patterns and how to clear them

Pattern Display/Description
An SC code appears on
the control panel and the
A machine becomes
inaccessible (Safety-
related SC).
When a function is
selected, an SC code
B appears on the control
panel and the machine
becomes inaccessible.
Causes
The machine is too hot or
cold at start-up.
The top cover is open.
-
-
How to clear the SC
code
The service engineer
must reset the
machine. Enter the SP
mode, turn the main
power switch off and
then back on.
The user must reset the
machine. Turn the
power key or the main
power switch off and
then back on.
Action
Wait until "Ready" appears on the
display.
Close the top cover.
A used ink collector unit has been
installed. Install a new ink collector unit.
Ink cartridge has run out for the color
indicated on the operation panel
display. Replace the ink cartridge for the
color indicated on the operation panel
display.
SC call/alarm for customer
support
Occurrence & alarm count =>
reports immediately.
Occurrence & alarm count =>
Turn the main power switch off
and then back on. => Alarm
count and reporting is performed
only if it occurs again.
Error Codes
235