Adtech iMASTER – A1 Series User Manual page 49

A1-User's Manual
(3) Mode shift in home mode
REM
Motor Speed
rpm
M
otor current
A
Motor torque
%
FAULT
REM
oC
The VFD output current exceeds the
rated current by more than 200%. This
may occur if the motor is locked or the
load is excessive.
BACK
REM
Parameters
Parameter Copy
Event log
BACK
※ Menu mode has six kinds of sub menu
- Parameters: change the value of parameter
- Parameter copy: all parameters read, write and verify
- Event Info: save the fault history automatically
- System info: display the system information
- Settings: configuration of LCD keypad
- Options: home display values
HOME 60Hz
60.00Hz
1775
10.3
12.1
09:40 MENU
FAULT 60 Hz
60.00Hz
Over Current
09:40 RESET
MENU 60 Hz
60.00Hz
09:40 SELECT
Power on, the display emerges as shown on the
left. The present mode is the HOME mode
1. Press fault key once (left key)
- Go to below A
2. Press menu key once (right key)
-
Go to below B
A.
The display emerges as shown on the left. The
present mode is the FAULT mode
B.
The display emerges as shown on the left. The
present mode is the MENU mode
４５