Extron electronics PVS 407D User Manual page 35

Polevault digital switcher
Hide thumbs Also See for PVS 407D:
Table of Contents

Advertisement

Command
VoiceLift – VLR 302 and VLR 102
Request VoiceLift status
information (VLR 302)
View VoiceLift status
(VLR 102)
NOTES:
E25
Returns
(device not present) when VoiceLift receiver is not detected/present.
Example A: Rly11 Rly20 Pair11 Ver1.00.0002.
Switcher sends out the unsolicited responses (with tag) via Ethernet/USB/RS-232 whenever there is any state change on the VoiceLift
receiver.
X3*
KEY:
= LINK slot 1
X3(
= LINK slot 2
X4)
= Relay 1
X4!
= Relay 2
X4@
= Firmware Version
X4%
= Relay
X4^
= Contact closure input state
X4&
= VoiceLift microphone status
VoiceLift Pro Microphone Usage
View microphone usage
(hours)
Reset microphone usage
NOTES:
Maximum hours with five digits from
Value is capped at 99999:59 and remains until it is reset.
E25
Returns
(device not present) when VoiceLift receiver is not detected/present.
ASCII Command
Response
(host to switcher)
(switcher to host)
34I
Rly1
X3(
•Ver
or E25
Inf34*Rly1
Verbose mode 2/3
Pair
or Inf34*E25
34I
X4%
or E25
Verbose mode 2/3
Inf34*
or Inf34*E25
Example B: Inf34* Rly11 Rly20 Pair11 Ver1.00.0002
0
= LINK slot 1 is not paired or pairing fails.
1 = LINK slot 1 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
0
= LINK slot 2 is not paired or pairing fails.
1 = LINK slot 2 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
0 = Off
0 = Off
Firmware version info with build. Example response: 1.00.0042
0 = Off
0 = Open
0 = No carrier/ microphone is off
1 = Channel A or C
E
USAG}
HHHHH:MM
or E25
or E14
Usag HHHHH:MM
Verbose mode 2/3
or Usag*E25
or Usag*E14
E
Usag00000:00
0USAG
}
or Usag*E25
or Usag*E14
00000
to 99999 values. Maximum minutes with two digits from
X4)
X4!
X3*
•Rly2
•Pair
X4@]
]
X4)
X4!
•Rly2
X3* X3(
X4@]
•Ver
]
X4^
X4&]
]
X4%
X4^
X4&]
]
1 = On
1 = On
1 = On
1 = Closed
2 = Channel B or D
3 = Channels A or C and B or D
]
]
]
]
]
]
]
]
]
PVS 407D • SIS Communication and Control
Additional Description
View information on VoiceLift status.
Device is not present.
Device is not present.
View information on VoiceLift status.
Device is not present.
Device is not present.
HHHHH:MM = hours: minutes
Device is not present.
VLR 102 detected, expected VLR 302.
Reset usage to zero.
Device is not present.
VLR 102 detected, expected VLR 302.
00
to 59 values (ex. 12345:15).
29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PVS 407D and is the answer not in the manual?

Table of Contents