Extron electronics PVS 407D User Manual page 36

Command
VoiceLift Pro Microphone Pairing
Initiate pairing
NOTE: When both LINK slots are occupied, user/PCS must clear the existing pairing first (
firmware sends out Pair99 response indicating both LINK slots are already occupied.
Clear pairing
View pairing
NOTES:
•
Example A: Pair99 unsolicited response is sent out when the VLR 302 receiver is unable to enter pairing mode due to an already paired
microphone is On and connected, or both LINK slots are already occupied.
•
Example B: Pair11 response indicates that microphones are paired to both LINK slots 1 and 2. User must clear the pairing first (0 PAIR) prior
to initiate pairing (1 PAIR) to pair new microphone otherwise firmware sends out Pair99 (see above).
X3*
KEY: = LINK slot 1
X3(
= LINK slot 2
VoiceLift Pro Chime Setting
Set audible chime
View audible chime
X3&
KEY: = Audible Chime
ASCII Command Response
(host to switcher) (switcher to host)
E
1PAIR} Pair1
Pair
or Pair*E25
or Pair*E14
E
0PAIR} Pair0
Pair00
or Pair*E25
or Pair*E14
E X3* X3(]
PAIR}
or E25
or E14
Verbose mode 2/3
Pair
or Pair*E25
or Pair*E14
0 = LINK slot 1 is not paired or pairing fails.
1 = LINK slot 1 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
0 = LINK slot 2 is not paired or pairing fails.
1 = LINK slot 2 is paired to a microphone.
9 = Microphone is on/ connected or LINK slots are occupied and cannot pair.
X3&
E Chim
CHIM}
or Chim*E25
or Chim*E14
E X3&]
CHIM}
or E25
or E14
Verbose mode 2/3
Chim
or Chim*E25
or Chim*E14
0 = Off/disable
1 = On/enable (default)
E25
= Device not present/detected
]
X3* X3(]
]
]
0
PAIR) prior to initiate pairing (1 PAIR) otherwise
]
]
]
]
]
]
X3* X3(]
]
]
X3&]
]
]
]
]
X3&]
]
]
PVS 407D • SIS Communication and Control
Additional Description
Default is On.
Unsolicited response is sent out when
one of the LINK slots is successfully
paired or pairing fails after 30 second
timeout (for example Pair10).
Only one microphone can be paired at
a time.
Device is not present.
VLR 102 detected, expected VLR 302.
Remove all pairing.
Unsolicited response sent after the
Pair0 response that previous pairing
has been successfully cleared.
Device is not present.
VLR 102 detected, expected VLR 302.
Indicates whether microphones are
paired to each LINK slot.
Device is not present.
VLR 102 detected, expected VLR 302.
Default is On.
Device is not present.
VLR 102 detected, expected VLR 302.
View audible chime status.
Device is not present.
VLR 102 detected, expected VLR 302.
30