Log - Softing Modbus mbGate PA User Manual

Modbus Gateways - User Guide
Terms / Abbreviations
Baudrate
Tsl
Min Tsdr
Max Tsdr
Ttr
Highest Station Address
Tset
Max Retry limit
8.6.2

Log

The PROFIBUS log represents
troubleshoot a connection problem.
64
Meaning
The rate at which data is transferred in a PROFIBUS communication
segment. "1.5MBaud" means that segment can transfer a maximum of
1.5 megabits per second.
Slot Time: This time determines the maximum time the sender waits
for a response from the addressed device.
Minimum Station Delay Responder: The time that the slave must wait
before it may respond to a request from the master. The default value
is 11t .
Bit
Maximum Station Delay Responder: The time in which the slave must
respond to a request from the master. The value range is set between
60 and 800 t .
Bit
Target Rotation Time: This time is the maximum time available for one
Token rotation. In this time span, all DP masters receive the Token
once.
Indicates the highest valid device address in the PROFIBUS network.
Setup Time: This is the time that may pass between receiving a data
telegram and the respective reaction within a device.
The total number of retries.
the state of the PROFIBUS connection. The data helps Softing Support to
Version EN-092019-1.21