Reset; Https Certificates - Softing Modbus mbGate PA User Manual

Modbus Gateways - User Guide
8.3.4

Reset

1. Select [Erase Configuration] to reset your device to default settings.
2. Click [OK] to confirm your selection.
Your Modbus Gateway will be restarted with the default settings. License files and IP settings will not
be deleted.
8.3.5

HTTPS certificates

If you access your gateway on an HTTPS connection, make sure the gateway uses a trusted certificate. You
can check easily if the IP address of your gateway is secured by a certificate. Depending on the settings of
your web browser, Chrome, Explorer, and Firefox typically display a padlock icon in the address bar to
indicate that a secured HTTP connection is used. Click on the icon to find out which type of security and
certificate is used.
All three gateways use Open SSL V1.0.2 for TLS 1.2. If you want to use a different certificate to secure
your gateway, select Settings
certificate file or intermediate certificate file.
When you configure the HTTPS settings , the initially installed self-signed certificate is replaced. You can
restore the original certificate by resetting the default gateway configuration (Settings
Configuration).
Note
You need to be logged in as
54
Note
You need to be logged in as
HTTPS and choose the upload options to install a private key, server
51
administrator .
51
administrator to change the HTTPS settings.
Reset Erase
Version EN-092019-1.21