Setting The Ip Address Of Your Pc - Softing Modbus mbGate PA User Manual

Modbus Gateways - User Guide
4.3

Setting the IP address of your PC

If you have not changed the IP address of the Modbus Gateway as described in the previous
will need to configure the IP address of your PC to access the gateway from your PC.
The following chapter describes how to set a static IP address in Windows 10.
1. Click Start
2. Select Network and Internet
A new window opens where you can view your basic network information.
3. Click on your Internet connection (either Ethernet or wireless) next to Connections under View your
active networks.
A new window opens.
4. Click [Properties].
5. Select Internet Protocol Version 4 (TCP/IPv4).
The following window opens.
6. Select Use the following IP address and enter a specific IP address and Subnet mask. In our example
we use the following settings:
IP-Adresse:
Subnet mask:
7. Click [OK] to confirm.
22
Windows System Control Panel from your task bar.
Network and Sharing Center.
192.168.0.1
255.255.255.0
20
Section you
Version EN-092019-1.21