Agilent Technologies BenchCel User Manual page 89

C AU T I O N
BenchCel Microplate Handler User Guide
Note: The default teachpoint file name is Teachpoints_<profilename>.xml,
where <profilename> is the name of the profile.
c
Append the teachpoint file name with the word backup, and then click Save.
Note: The Teachpoint File area displays the file storage location.
VWorks Plus only. If an audit trail is being logged for records in the development
state, the Audit Comment dialog box opens. Select or type the audit comment, and
then click OK.
9
In the Teachpoint File area, click
box, locate and select your original teachpoint file, and then click Open.
You will edit the teachpoints in this file in another procedure.
If the teachpoint file was copied from another computer, you must verify the
teachpoints for the new profile before using the profile.
4 Setting up the BenchCel device
, and in the Select a Teachpoint File dialog
Creating profiles
79