Determining The Teachpoint Coordinates - Agilent Technologies BenchCel User Manual

4 Setting up the BenchCel device
Setting and managing teachpoints

Determining the teachpoint coordinates

WAR NING
86
To prevent potential injury, make sure no one else can issue commands at the
controlling computer while you are manually determining the teachpoint coordinates.
To determine the coordinates of the pickup and placement location:
1
Place two or three spare microplates in a labware rack, and then install the rack on
the BenchCel Microplate Handler. For instructions, see
labware racks" on page 119
page 123.
2
Open BenchCel Diagnostics for the BenchCel device that you are setting up.
3
On the Profiles page, look in the Teachpoint File area to make sure the correct
teachpoint file is loaded. You will be adding new teachpoints to this file.
4
In the Controls tab, select the labware definition from the Labware list.
and "Installing and uninstalling the labware racks" on
BenchCel Microplate Handler User Guide
"Filling and emptying the