Agilent Technologies BenchCel User Manual page 41

BenchCel ActiveX control
BenchCel Diagnostics software
BenchCel Microplate Handler User Guide
Figure
VWorks software window
You can use the BenchCel ActiveX control instead of the VWorks software to control
the BenchCel Microplate Handler. The BenchCel ActiveX control enables the BenchCel
device to interact with a third-party lab automation system.
Accessed through the VWorks software or the BenchCel ActiveX control, Diagnostics
enables you to do the following:
•
Create and manage profiles. The software uses the information in the profile to
communicate between the BenchCel device and the controlling computer. You
create profiles using the Profiles tab in BenchCel Diagnostics when you set up the
BenchCel Microplate Handler.
2 Introduction
Software description
31