Disconnecting A Call On Hold - 3Com OfficeConnect 3C892A User Manual

C 7: S V C S
82
HAPTER UPPLEMENTARY OICE ALL ERVICES
To toggle back and forth between the two calls, simply press and release the
switch hook button.
3 To end an initial call when you hear the Call Waiting tone (instead of putting the
call on hold) hang up the phone and wait for it to ring. (The phone rings to
indicate that there is a an incoming call and the B-channel LED flashes.)
You are connected to the second call when you pick up. Or, if you already have a
call on hold while on an active call and you want to end the active call before
returning to the call on hold, hang up the phone and wait for it to ring back. Pick
up the phone to reconnect to the call on hold.
What if the active caller hangs up from the far end?
If the active caller hangs up from the far end, the call on hold will remain on hold
until you retrieve it by pressing and releasing the switch hook button.
What if the call on hold is dropped from the far end?
If the call on hold is dropped from the far end, you will receive no notice. If you
press and release the switch hook button, you will remain on the same call.

Disconnecting a Call on Hold

To disconnect a call on hold, you must first make a call on hold active in order to
drop it. To make the call on hold active, press and release the switch hook button.
Then, simply hang up the phone to drop the active call.
The ISDN LAN modem can support a maximum of two simultaneous voice calls per
phone port. An incoming call is rejected and the caller hears the "user busy" tone
if you already have two calls up (one active and one on hold). An incoming Call
Waiting call will also be rejected if you are making an outgoing call and the call is
not yet active, or if your telephone is already ringing for an incoming call. In other
words, you are only able to receive a call using the Call Waiting feature when you
have one active call.