3Com OfficeConnect 3C892A User Manual page 86

C 6: A
80
HAPTER DVANCED
C
ONFIGURATION
15 Click OK to close the Server Types window.
16 Click OK to close your connection window.
17 Double-click your new connection icon created via Dial-Up Networking.
The Connect To window will open. You may choose to leave the Username and
Password fields blank at this time.
18 Click Connect.
Your local computer will dial and establish a connection with your remote ISDN
LAN Modem.
19 Once your call has been established, launch a Web browser on your local
computer.
The Web browser attempts to load its default Start Page. Click Stop to cancel this
procedure.
20 Enter the following address in your Web browser's address bar:
http://192.168.1.1/mainpage.htm
configuration page.
If you previously set your ISDN LAN Modem's IP address to something other than
the factory default address, enter this IP address in your Web browser's address
bar in place of the address shown in the URL above.
21 Enter your password if required and then click Submit.
The ISDN LAN Modem main configuration page appears. You now have full access
and can make any configuration changes as if you were connected via your local
LAN. Note that you are limited to configuration of the LAN Modem when dialing
in from a remote location. For instance, you cannot access the Web when during a
remote dial in session.
If you cannot access the ISDN LAN modem, ask a local user to check the Call
Routing table and make sure that the data box is checked for the telephone
number you are dialing.
to go to the remote ISDN LAN Modem's main